At Hitech Motorsport, our full machine shop is capable of handling anything from stock to super-stock to custom drag race and road race engines. We do this with the experience and equipment to handle engine machining and assembly and installation into your vehicle.
Heads, Block, Rotating Assembly; We handle everything.
With our Flow Bench, we can even port match heads and install larger valves and springs capable of handling the power you desire.
We also offer custom camshaft grinding, cam tunnel boring, flywheel balancing and resurfacing.
Professional service, professional atmosphere.
Hitech Motorsport Inc.
|
Machine shop pricing |
|
|
Hitech Motorsport inc. |
|
|
3/1/07 |
|
Heads: |
|
|
|
Surface heads (up to .020") each |
$45 |
|
V8 2V/cyl valve job per pair, clean & assembly included |
$350 |
|
Valve guide replace (per guide) |
$20 |
|
Exhaust seats replace (per seat) |
$45 |
|
Pressure test |
$75 |
|
Machine for screw in studs |
$200 |
|
Magnaflux |
$65 |
|
Flow bench with numbers |
$125 |
|
Stage 1 port work (aluminum) |
$300 |
|
Stage 2 port work (aluminum) |
$600 |
|
Maximum port (aluminum) |
$900 |
|
Stage 1 port work (cast iron) |
$375 |
|
Stage 2 port work (cast iron) |
$675 |
|
Maximum port work (cast iron) |
$975 |
|
Broken bolt |
$40 |
|
Install heli coil |
$40 |
|
Epoxy intake and heads |
quote |
|
Weld up aluminum heads and restore |
quote |
|
Install bronze wall guide liners |
$100 |
|
Head disassemble clean, inspect, and reassemble (per head) |
$90 |
|
|
|
Block work: |
|
|
|
Bore and hone with torque plate |
$275 |
|
Line hone |
$165 |
|
Square deck |
$175 |
|
Install 3 center caps |
$150 |
|
Line bore with line hone |
$295 |
|
Cam tunnel boring |
$275 |
|
Stroker clearance |
$75 |
|
Hard block engine |
$250 |
|
Lifter truing with bronze sleeves |
$375 |
|
Jet wash and chase main threads and head threads |
$175 |
|
Install sleeves (per sleeve) labor only |
$125 |
|
Correct bellhousing dowel locations |
$90 |
|
Install cam bearings |
$45 |
|
Install brass freeze plugs |
$45 |
|
Paint block |
$45 |
|
Remove casting flash a stress relive block |
$95 |
|
|
|
Rotating assembly: |
|
|
|
Balance rotating assembly |
$225 |
|
Balance flywheel |
$45 |
|
surface flywheel |
$45 |
|
fly cut pistons (8) |
$175 |
|
Mag check |
$75 |
|
Turn crank |
$175 |
|
Size rods (per rod) |
$40 |
|
Install pistons on rods |
$95 |
|
Ceramic coat and graphite coat pistons |
$375 |
|
Hand cut rings |
$175 |
|
Balance crank |
$125 |
|
Heavy metal for balancing (per oz) |
$25 |
|
